Functions And Controls; Phono Operation; Automatic Stop - König Electronic HAV-TT30USB Mode D'emploi

FUNCTIONS AND CONTROLS

TURNTABLE/PHONO
1
REAR PANEL
10
1. 45 RPM ADAPTOR
2. TONE ARM
3. SPEED SELECTOR (33⅓/45/78 RPM)
4. TONE ARM REST
5. STYLUS GUARD
6. TURNTABLE COVER
7. POWER
8. AUX OUT
9. AUX IN
10. USB OUTPUT
11. USB CABLE
AC OPERATION
This turntable operates with AC 230 V/50 Hz power. Insert the plug of the AC power cord into a wall outlet with AC power
supply.

PHONO OPERATION

1. Lift the turntable cover fully.
2. Remove the stylus guard.
3. Press the power knob to on.
4. Set the speed selector to 33⅓ , 45 or 78 RPM according to the size of the record you are playing.
5. Place the record with label side up (the side you want to play on the turntable)
Note: For playing single records, first insert the 45 RPM adaptor in the center of the turntable, then place the record.
6. Place the stylus carefully on the record.
7. To stop operation, carefully lift up the tone arm and return it to the tone arm reset position.
8. Press the power knob to off.
9. Close the turntable cover gently.

AUTOMATIC STOP

To protect your records and prevent unnecessary wear to the stylus, this unit is equipped with an automatic stop system.
When the record ends during play, the power supply to the turntable will automatically cut to stop the turntable from
running.
ENGLISH
2
3
4
5
8 9
2
6
7
11