Intuix S-800 Manuel D'utilisation page 11

Scheduled recording
Press on the schedule record button in the extended toolbar.
This will open the Schedule Record window, as follows :
To schedule a recording, you will need to enter the following information :
1. The date
Do this by clicking on a date in the top right-hand window, thus highlighting it by turning it blue.
By default, today's date will already be highlighted.
2. The start and end times of the recording
These must be written in 24 hour format, e.g. half past three in the afternoon would be written 15 30.
3. The channel
Choose a channel from the list.
4. The frequency of the recording
For Frequency, you can choose the following from the drop-down list :
1 Time Record (will be displayed in orange), Daily Record (will be displayed in purple),
or Weekly Record (will be displayed in green).
Once you have programmed the recording, press Add. You can then add more programmed recordings to
the list, remembering to press Add after each one.
Below the channel list, you will see a representation of the disc space assigned to store recordings. The
blue area shows what disk space has already been used, the yellow is which space has been allocated for
scheduled recordings, and red shows available disk space.
Note that the Sawy Digital TV software will have to be running when it is time to start the scheduled
recording. If you are watching another channel at the time the scheduled recording is due to start,
the software will automatically change channel.
Watching a Recorded Programme
Press the recorded files button (in the extended toolbar).
Pressing this button will open up a browser window which will allow you to search for recorded mpg/mpeg
files. Note that this method allows you to view both scheduled recordings and live recordings.
EN-7