Setup Menu; Functions Menu - Bosch ACS 753 Notice Originale

en 48 | ACS 753 | Introduction
Symbol Description
OK to confirm, proceed, or save settings.
ESC to cancel the operation and return to
the previous function or the Main Menu.
UP allows to move the functions selection of
a menu upward.
DOWN allows to move the functions
selection of a menu downward.
PRINT to print.
BACKSPACE to erase the character to the
left of the cursor.
PAUSE to pause a process.
PLAY to resume a paused process.
REPEAT to repeat the last function.
DELETE to delete the selected item from the
station memory.
BLUETOOTH indicates that the Bluetooth
connection is enabled.
WIFI indicates that the WiFi connection is
enabled.
HS LS to set which side to charge (high
pressure, low pressure or both
ml oz to set the unit of measurement (ml or
oz).
kg oz lb to set the unit of measure (kg, oz or
lb).
USB to export data to a USB key.
|
SP00D00596 2019-07-04
3.6

Setup menu

3.6.1

Functions Menu

1. Call up the Main Menu.
2. Select
3. Select
€
Select Functions to access the following functions.
Function
A/C Perfomance Test Performs a pressure test on an A/C
Nx Test
Flush Hoses
System Flush
Tank Fill
sides).
Refrigerant Tracking To store the amount of refrigerant
€
Select
.
.
Description
system of a vehicle inside which
refrigerant is already present.
To find leaks on a vehicle A/C plant using
an external nitrogen cylinder or a mixture
of nitrogen and hydrogen.
To clean the station from oil residues in
preparation for maintenance of the next
vehicle.
Provides a method for removing oil by
forcing liquid refrigerant through the A/C
system or components of an A/C system.
After flushing, the refrigerant is recovered
from the machine and filtered by the
recirculation circuit.
To transfer the refrigerant from an
external tank to the internal tank.
The tank refill value can be adjusted
according to the user's needs. Refer
to the Tank refilling procedure in the
Maintenance section.
recovered and charged for each vehicle.
The display shows five selection options:
+ Display: to display the recovered and
charged refrigerant data.
+ Export to USB: to export the report
with the amount of refrigerant
recovered and charged on the vehicle.
The data is exported via USB stick,
recommended size at least 2 GB and
formatted FAT (key not supplied). The
data is transferred as a .csv file.
+ Erase all records: to delete all the data
stored on the station.
+ Print all records: to print all the data
stored on the station.
+ Disable Tracking: to disable the
refrigerant report function.
to return to the Setup Menu.
Robert Bosch GmbH