Technical Data - Einhell Global BM-G1000 E Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 8
Anleitung BM-G 1000 E
GB
Scope of delivery package
BM-G 1000 E,
Quick-change drill chuck1.5 -13 mm,
Additional grip with bit stop
Description
1
Quick-change drill chuck
2
Depth stop
3 Additional handle
4 Selector button: drill/hammer
5 Rating plate
6 Selector button: clockwise/anticlockwise
7 Speed control
8 Locking button
9 On/Off switch

Technical data

Voltage:
Power rating:
Drilling capacity
No Load Speed
No Load Speed
Number of blows
Safety insulated
Sound pressure level LPA
Sound power level LWA
Vibration a w
Weight
Caution
The BM-G 1000 E is not designed for the
operating of auxiliary devices.
Do not use near steams or inflammable liquids.
Only use sharp bits and suitable screwing bits.
Remove the plug from the socket for all adjusting
and cleaning work.
Protect the mains cable against any damage. Oil
and acids can damage the cable.
Do not carry the device by the mains cable.
6
24.02.2000 15:41 Uhr
Seite 6
Do not remove the plug from the socket by pulling
the mains cable.
Make sure before inserting the plug that the
operating switch is not locked.
When using a cable drum uncoil the cable com-
pletely. Cross-section of wire at least 1,5 mm
Do not overload machine.
Secure all workpieces to be processed sufficiently.
Do not allow children to have access.
Make sure you have a secure stance on ladders or
scaffold-ing when using the drill freehand.
Localise lines with a line detector in walls where
power, water or gas lines are laid invisibly.
Wear protection goggles and use a dust mask for
dust-producing work.
Always arrange for a qualified electrician to carry
out repairs
Use only original replacement parts
The level of noise at the workplace may exceed 85
dB(A). In this case you will need to introduce noise
protection measures for the user. The noise
generated by this electric tool was measured in
230 V ~ 50 Hz
accordance with ISO 3744, NFS 31-031
(84/537/EEC).
1000 W
Vibration measured on the handle acc. to ISO
Concrete 16 mm
8662-8.
Steel 13 mm
Wood 25 mm
Maintenance
0 - 920 min
-1
Always keep the drill clean.
0 - 2650 min
-1
Do not use corroding agents for cleaning plastic.
0 - 39.000 min
Check carbon brushes in the case of excessive
sparking.
Keep ventilation channels free.
105 dB(A)
If you discover any damage, you can define spare
118 dB(A)
parts precisely on account of the exploded view
drawing and parts list and place your request with
12,6 m/s
2
our customer
2,4 kg
service.
2
.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

42.597.00

Table des Matières