König Electronic GAMWII-WLNUN10 Mode D'emploi page 2

Introduction
The wireless playchuk is an extension of the Wii™ Mote. Connect the playchuk to
the Wii™ Mote and the two controllers will work harmoniously together. Due to the
wireless connection between the two there is even more freedom of movement. Each
controller has its specifi c features which makes sure there is even more fun in gaming!
Function
SYNC button
Power switch
LED indication
Charging port
Connector
LED indicator
Sync button
Connection instructions
• Power on the Wii™ console
• Connect the Wii™ remote to the Wii™ console
• Plug the Playchuk receiver into the Wii™ remote and press the SYNC button on the
receiver. The LED on the receiver will begin to fl ash
• Power on the Playchuk and press the SYNC button on the Playchuk (the LED lights will
stop fl ashing)
• The Playchuk is ready for use
Note
• When accidentally pressing the SYNC button, you will have to press the SYNC button
on the receiver to re-establish the connection
• When the Playchuk falls into sleep mode press Z button to activate it again
• Charge the Playchuk while in POWER OFF status
• Always wear the wrist strap when using the Playchuk
ENGLISH
2
3D stick
C button
Z button