LENCO BTC-055 Mode D'emploi page 9

Before first use:
1) The appliance can be powered either via a wall outlet or by the integrated
battery
2) Connect the mains adaptor (23)/to the power socket DC 5V (8) at the back of the
appliance. Connect the mains adapter (23) to a suitable wall outlet. Make sure
that the power supply voltage is the same as needed.
3) Turn the power switch (5) to "I", the speaker will play music without lights; if you
select "II", the lights will show a color animation.
4) Battery use: to charge the internal battery, put the ON/OFF switch (5) on the
backside of the device on "0" and connect the AC adaptor (23) to the wall outlet
and the battery will charge. When the battery power becomes low, you will ear a
sound warning every minute to remind you to charge again the battery.
Basic Function
Bluetooth Operation
1) Press the button mode (15) repeatedly, and you will hear a special Bluetooth
tone and the LED indicator (9) will quickly flash in blue.
2) Turn on the Bluetooth function on your external Bluetooth device, search and
select the BTC-055. If your Bluetooth item ask you for a code, you can enter
"0000". If the connection is successful, you will hear a Bluetooth tone and the
LED indicator (9) will flash slowly.
Using with the AUX in function with a Wired Device
To use the speaker as a wired device, plug one connector of the (24) 3.5mm audio
cable into the 3.5mm auxiliary audio input jack on the speaker, plug the other
connector into the headphone jack of your media-playing device.
While connected, playback is controlled via the wired device.
Using USB playing
Insert a USB device to the USB port (11), it will play music.
Also, press the number "0-9" (14) on the remote control to choose different songs
Using Micro SD card playing
Insert a Micro SD Card in the micro SD card slot (7) and a tone will be heard, the
content will play.
Also, press the number "0-9" (14) on the remote control to choose different songs
9