BB Boom IZZA Notice D'utilisation page 37

Make sure the enhanced child seat is securely locked in the desired position by
pulling or pushing or pull on the seat body.
Important ! Before making any car journey, ensure that the rotating part of the
enhanced child seat is fully engaged by trying to rotate the enhanced child seat in
both directions.
WARNING: DO NOT use rearward facing child seat in seating positions where an
active frontal airbag installed . Death or serious injury can occur.
5.4. Putting the child in/ Taking the child out
1. Adjust the rotation handle on the side of the base, rotating the seat body 90°
towards the vehicle door at the same time.
2. Now you can put your child in or take him or her out easily.
3. Secure your child in the seat
4. Rotate the seat body 90° again so it is facing either forwards or backwards,
depending on the age of your child, until it engages with a clicking sound.
Important ! Before every journey, make sure that the rotating seat body is fully
engaged.
5.5. Removing the enhanced child seat
1. Hold and push support leg adjustment handle and slide the lower section into
the upper section of the support leg until it is fully stored .
2. Loosen the ISOFIX connectors on both sides by pressing the ISOFIX release
button. at the same time ,move the ISOFIX connectors back into the ISOFIX
frame of the base .