Schneider Airsystems UHW 2000 Notice D'utilisation D'origine page 7

Table of contents - Part 1
1.1 General information ..................
1.2 Scope of delivery ......................
1.3 Conventional use ......................
1.4 Technical data ..........................
1.5 Components.............................
1.6 Commissioning .........................
1.7 EC Declaration of Conformity ......
The specified illustrations appear at the be-
ginning of the Operating Instructions.
1.1 General information
Observe the safety instructions!
Read the Instruction Manual!
Note: Read and memorise part 2 of the
instruction manual!
Subject to technical modifications. Illustra-
tions may deviate from the original.
1.4 Technical data
Air consumption
Max. permissible pressure
Working pressure (flow pressure)
Hose for cavity sealing (length)
Hose for cavity sealing (diameter)
Ambient temperature
Recommended hose diameter (inner) at L= 10 m
Overall dimensions (without hose) width x depth x height
Weight
1.5 Components
01 Plug nipple (non-locking)
02 Trigger lever
05 Suction pipe
06 Counternut
10 Spray nozzle
11 Spray hose
15 Ventilation
1.2 Scope of delivery
– Multi-purpose gun
3
– Spray hose
3
– Instruction manual
3
1.3 Conventional use
3
3
The compressed air multi-purpose gun
3
is an industrial tool designed for:
4
effective cleaning, roughing and removal of
rust and paint from metal, wood and other
materials.
Any other type of use is considered contrary
to the intended use.
1.6 Commissioning
Note: Read and memorise part 2 of the
instruction manual!
Caution: Depressurise the unit!
UHW 2000
120 - 180 l/min
6 bar
4 - 6 bar
90 cm
8 mm
15 - 20 °C
9 mm
190 x 50 x 190 mm
0,66 kg
GB
I/ 3