Table des Matières
Publicité
Appendix C. Exemple de fichier de configuration
Toutes les valeurs des paramètres répertoriées ci-dessous correspondent aux
réglages d'usine.
# Current configuration of YDBM-01 Battery Monitor
# Firmware version: 1.00 19/10/2020
# Current Date: 01.11.2020 14:20:32 UTC
# Status: voltage +12.10V, current +0.0A, temperature is not available.
# Calculations (SOC, consumed AH, time remaining, and SOH) (ON|OFF)
CALCS=OFF
# State of Charge: not available. Calculations are off.
# State of Health: not available. Calculations are off.
# Consumed Amp Hours: not available. Calculations are off.
# FULL SYNCHRONIZATION INFORMATION
# Full Synchronization (ON|OFF)
FULL_SYNC=OFF
# SHUNT SETTINGS
# Shunt Current (A)
SHUNT_CUR=50
# Shunt Voltage Drop (mV)
SHUNT_VOL=75
# BATTERY SETTINGS
— 62 —
Publicité
Table des Matières
