Burning Technology LIBRA Instructions Pour L'installation Et La Maintenance page 16

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

The stove smokes during stoking
a)
wet or resinous wood
(use dry hardwood)
b)
unheated stove
(heat up the stove to operating temperature)
c)
bad chimney draught
(open the chimney damper, check the chimney connection, clean the chimney, turn off the extractor hood)
There is a burning smell near the stove
a)
reverse the draught of the chimney due to weather conditions
(wait for better weather)
b)
door not completely closed or not sealing well
(properly close the door,
c)
low chimney draught
(check the chimney, turn off the extractor hood)
Glass blackened with smoke
a)
wet or resinous wood
(use dry hardwood)
b)
unheated stove
(heat up the stove to operating temperature, open the combustion air supply lever more)
c)
door not sealing well
(change the door seal)
d)
glass not sealing well
(change the glass seal)
Decolourization, blistering of painted parts
a)
temperature in the stove is too high
(use appropriate fuel and its amount)
Fire in the chimney
a)
neglect of check and cleaning, using wet fuel
(in no case put out with water, close combustion air supply completely, if possible, cover the chimney, contact the
chimney service to assess the status of the chimney after the fire, contact the manufacturer for inspection of the
appliance)
14. Package Material
The stoves are packaged with:
a.
Gloves
b. cover lid for back exhaust instalation
c.
Instructions for Installation, Use and Maintenance
change the door seal)
16

Publicité

Table des Matières
loading

Table des Matières