Bose LIFESTYLE DVD Notice D'utilisation page 25

English TAB 2
6. Choose the VS-2 cable and notice the small plug at
one end.
Small plug
7. Locate the connector labeled DC POWER Out on
the VS-2 video enhancer.
TAB 3 TAB 4 TAB 5 TAB 6
C
OMPLETE
8. Insert the gray plug labeled DC Power into this
connector.
Important Note: The two power cables that plug into
the end of the VS-2 contain antennas for the radio
frequency (RF) remote control.
BE SURE to fully extend both cables and keep them
away from other system cables as much as possible.
TAB 7 TAB 8
S C
YSTEM ONNECTIONS
21