Standby Mode; Program Menu - Watts MILUX RF Guide Utilisateur

STANDBY mode:

Use this mode to switch heating off. The MILUX RF first switches off the heating
and then automatically switches off itself (the screen goes blank). The programs
and the time of day are all saved, and the consumption is significantly reduced.
To switch back on, press a key.
Press (OK) key to view for a moment the room temperature.
DANGER: Has your thermostat is stopped YOUR INSTALLATION CAN
FREEZE.

PROGRAM menu:

By pressing (+) or (-) keys the Program number starts to blink.
1/ If you select a built-in program "P1 to P9" and press (Ok) this program will be
followed in
Use (+) & (-) to
choose a
program number.
Built-in programs description *(pages 45 - 46)
P1 Morning, Evening & Week-end
P2 Morning, Midi, Evening & Week-end
P3 Day & Week-end
P4 Evening & Week-end
P5 Morning, Evening (bathroom)
2/ If you select a built-in program "U1 to U4" and press (Ok) you will enter in
user program edition.
USER PROGRAM EDITION
Choose an
user program
with (+) & (-)
(+)
The key sets
(-)
The key sets
Use (◄) or (►) keys to slide the blinking cursor position in the day and modify
or correct easily the program.
When the displayed day is correct, press (Ok) to jump to the following day.
When you'll press (Ok) on day 7, your program is finish and validate.
Now your user program will be followed in
mode.
temperature at the current blinking program hour
temperature at the current blinking program hour
Use (◄) & (►) to see
the other days in the
program
P6 Morning, Afternoon & Week-end
P7 7h - 19h (Office)
P8 8h - 19h, Saturday (Shop)
P9 Week-end (Secondary House)
operating mode.
5
Shows the daily
program
Day
Hour at the
cursor position
GB