Learn-Function - LEAD dynamic WALL CONTROL DYNAMIC WHITE WCW Manuel D'utilisation

ENGLISH
2
Installation
1 x
2.1 Switch your wall controller on.

Learn-Function

+
2.3 Press one of the buttons Z1-Z4 to assign the
luminaire to the respective zone and confirm by
swiping the colour/dimmer bar. Complete the entire
'learning' process within 15 seconds.
LEAD ENERGY AG Am Stadtbad 37 45219 Essen-Kettwig
On
15 sec.
Subject to errors and amendments
2.2 Note the installation steps from the operating
manual for your LED DYNAMIC WHITE product from
LEAD DYNAMIC. Start the 'LEARN' function on your
LED DYNAMIC WHITE product.
2.4 Your luminaire will flash once to confirm that it
has been assigned to the selected zone and can now
be controlled using your wall controller.
Information / Technical support: www.lead-energy.com