Specifications; Error Codes; For Your Safety - Fiilex MATRIXII RGBW Guide De Démarrage Rapide

Specifications

Fresnel Size
Beam Angle
CCT Range
Hue Control
CRI
Dimming
LED
Input Power
Power Consumption
Power Adapter
Power Port
DMX Port
USB 5V
Weight
Size
Mount Style
Thermal Design
Operating Temperature

Error Codes

01 Over Voltage Protection
02 Under Voltage Protection
03 Display and Control Board Conjunction Error
05
Fan Error
14 / 24 / 34 / 44 Array 1 / 2 / 3 / 4 Thermistor Conjuction Error
16 / 26 / 36 / 46
PCBA 1 / 2 / 3 / 4 Thermistor Conjuction Error
OVERHEAT
Array or PCBA Overheat

For Your Safety

• CAUTION! High Beam Intensity! - Do NOT look into the light source of the fixture.
• Do NOT point the light at combustible or flammable materials.
• Do NOT attempt to disassemble the body of Matrix II RGBW. Doing so will void the warranty.
• Do NOT install Matrix II RGBW in a damp or wet area.
• Do NOT cover/block the side and back air vents.
• Use only the included power supply. Failure to do so may cause damage to the light.
• Use only a soft, dry towel to gently clean the exterior of the light.
• Do NOT lift or suspend the light by the power cable.
• Do NOT use the Matrix II RGBW or accessories if they display any physical damage.
• Before first use, make sure to remove all protective membranes.
Optional Quad Fresnel Leans (Removable)
99° (31° w/ Optional Quad Fresnel Lens)
2800-10000K Continuous Tuning
± 0.25 Green/Magenta
93 Typical
100% - 0%
(Four) 75W DiCon Dense Matrix LED
120V-240VAC
340W Max AC | 300W Max DC
AC Input: 100-240V AC, 50~60Hz | DC Output: 48V
XLR-3P
Two XLR Ports-5P (512 Addresses)
Yes
Fixture: 9.7 lbs / 4.4kg (Includes Yoke) | Power Adapter: 5.7 lbs/2.6kg
L 6.7 " x W 12.2 " x H 16.5 " / L 171mm x W 311mm x H 418mm
Baby Stud 5/8" Female (16mm) and Junior Stud 1-1/8" Male (28mm)
Advanced Vapor Cooling System (Fan Cooled)
32 - 104ºF / 0 - 40º C
8