Light Control; Bluetooth Control; Bluetooth Operation - Decotech Flame BTL075 Mode D'emploi

WARNING:
• Risk of explosion if battery is incorrectly replaced. Please only replace it with
an identical or an equivalent battery. (For service instructions only; battery is
not intended to be replaced by the user).
• The battery should not be exposed to high temperatures, such as sunlight, fire
or anything similar.
• Significant electromagnetic interference or electrostatic discharges may cause
the device to malfunction or lose data. If the device is not functioning correctly,
switch it off and then on again, or unplug the USB cable.
INSTALLATION ON A STAND
To turn the flame LED lights on / off, press the
Bluetooth® operation
1. To activate auto-detection of a nearby device, press and hold the
top of the speaker. The control panel will light up in white.
2. Activate the Bluetooth function on your smartphone or other Bluetooth enabled
device. In the Bluetooth menu of your device, "BTL075" should appear. Select
it to start pairing to the speaker.
3. Once pairing is successful, the indicator will glow steadily and a "Beep" sound
will come out from the speaker. You can use
music.
4. To stop the connection with the speaker, press and hold the
disconnection or stop the connection directly from your personal device.
Notes:
• If your Bluetooth® device requires a password, the default password is 0000.
• Some music players do not fully support Bluetooth® audio controls. Play/
pause, previous and next buttons on the Bluetooth® speaker may not
respond. The music player may also turn off. To get the best control
experience in the said player, use the on-screen track controls of your music
player rather than those on the speaker.
BTL075IM1417_101_V07.indd 9
You can install your Bluetooth® LED Flame Speaker
on a tripod, stick or other stand (not included) with a
Metric 6 ¼ screw head.

LIGHT CONTROL

BLUETOOTH CONTROL

9
ENGLISH
button.
button on
/ , buttons to control your
button until
10/10/17 5:38 pm