Publicité
Parts Included may vary with
kit model
Pièces incluses peuvent varier
selon le modèle de kit
1) Installation & Assembly: Connect the inside antenna and the outside antenna as
shown in Fig. 1.
2) Outside antenna: Place outside antenna outside of the vehicle as far from the inside antenna as
possible and away from sunroof.
3) Inside Antenna: Connect the inside antenna in a central spot in the vehicle. Center console is a
good location.
4) Separation: Separate the outside and inside antenna as much as possible for best coverage. For
RVs 18 ft. is recommended.
5) Power: Connect the power supply to the booster and turn it on.
6) Coverage: Use your cell phone to determine if coverage is OK. If coverage is not adequate, please
look at the green lights to determine if the booster has turned down its gain and follow the steps on
page 4.
Important:
Use only the power supply included with the booster. Connecting any other power supply at any time
will result in damage to the booster and will void the warranty.
Do not turn on the power switch until ALL cables have been screwed or plugged into the booster or
you can cause damage to the booster.
NOTE: It is normal for the booster to be quite warm while operating
Specifi cations
Publicité
