EUROM PD2100 XXL Manuel D'utilisation page 17

Step 2: Feed the power cord through the base and the bottom
tube and pull through around 2m of cable.
Step 3: Connect the two middle tubes with the bottom tube by
screw them together.
Step 4: Place the plug of the mains
cable through the base, lower,
middle and upper tube. Now connect
the socket with the connection in het
heating head. Cover this connection
with the enclosed protective box.
Step 5: Place the terrace heater in its highest
position (See also point 7). Gently pull the
power cord out of the socket. Secure the power
cord under the weighted base using the
supplied 4pcs. M4 nuts. In doing this, ensure
that the cable in the stand is not under current.
Allow the cable sufficient space so that the
device can be placed in the highest position,
but avoid excess cable in the stand.
Step 6: Push the heating head onto the top tube
and fix it in position using the supplied 2x M4x8
screws.
17