CDVI BS60 Manuel D'installation page 2

INSTALLATION MANUAL
BS60 - BS60H
Uninterruptible PSU + Digital Clock Timer Option (BS60H)
PRODUCT PRESENTATION
Regulated PSU.
7 A/H battery included.
Polycarbonate casing.
Primary and secondary inputs
protected by fuses.
VO: fi re-retardant.
Additional AC output.
Digital clock timer option: BS60H version.
Input voltage: 230V ± 10%, 50/60 Hz.
Power consumption: 0.2A.
Outputs:
- 12V dc regulated, uninterruptible,
- 12V ac non-interruptible.
Maximum load current:
- 12V dc output / 1.5A,
- 12V ac output / 0.5A.
TERMINAL BLOCK
OUTPUTS
C
R
T
+
-
~
~
1
3
4 (Black wire)
5 (Red wire)
Assembly and Connections:
Remove the cover by unscrewing the 4 screws at the corners.
Thread the wires through the holes designed for this purpose
on the lower side. When mounting the casing on a wall, use the
screw holes at the corners of the lower part of the casing. When
reassembling do not forget to reconnect the battery wires!
COMPLIANT WITH EUROPEAN STANDARDS
EN 55022 EN 61000-4-2
EN 61000-3-2 EN 61000-4-3
EN 61000-3-3 EN 61000-4-4
This product must be installed in accordance
with the local safety standards.
cdvi.com
2
cdvigroup.com
VOLTAGE
Digital
Clock Timer
(BS60H only)
+12V dc
0V
12V ac
12V ac
230V ac
230V ac
- Battery
+ Battery
EN 61000-4-5
EN 61000-4-6
EN 61000-4-11
WEEE & RoHS
IP30 0°C to +40°C
Do not adjust the factory-set
potentiometer
2A fuse
Position the PSU
as on the left,
with the label
horizontal.
CE certifi cation
TRANSFORMER
0.315A fuse