Overheat Protection; Technical Data; Disposal - BOMANN HL 1097 CB Mode D'emploi

3. The fan heater will then keep the desired temperature level.
CAUTION:
When not using the appliance, disconnect the mains plug.
Oscillation
The appliance is equipped with an oscillating function in order
to provide uniform heating or ventilation.
Use the control knob positions 2a-d to activate and use the
oscillating function.
CAUTION:
Never adjust the swiveling mechanism manually. The mecha-
nism could become damaged.
NOTE:
The appliance features a swiveling range of approx. 45 °.
Fan Operation
If you want to use the device as a fan, turn the function control
knob to the fan icon and turn the temperature control to highest
position.
Stop Operation
Stop operation by setting the control knob to the 0 position. The
indicator lamp turns off. Then disconnect the mains plug from
the socket.

Overheat Protection

The device features an overheat protection mechanism causing
the device to switch off automatically in case of overheating.
1. Turn the function control knob to 0 position and disconnect
the mains plug from the socket.
2. Let the appliance cool down for approx. 10 minutes before
using it again.
NOTE:
If the overheat protection mechanism causes the appliance
to switch off again after a short period, this might indicate a
defect.
1. Switch off the appliance and disconnect it from the mains.
2. Have the appliance checked by your dealer or our
customer service.
HL1097CB_IM_new2
Cleaning
WARNING:
• Always disconnect from the mains before cleaning and
wait until the appliance has cooled down.
• Never immerse the appliance in water to clean it. This
may lead to electrical shock or fire.
CAUTION:
• Do not use wire brushes or other abrasive materials.
• Do not use caustic or scouring agents.
• Wipe away dust with a dry cloth.
• Flecks can be removed with a suitably damp cloth.
Cleaning the Filter
Open the filter cover on the rear side. Remove the filter and
clean it under running water.
CAUTION:
Let the filter dry completely before using it again.

Technical Data

Model: .......................................................................HL 1097 CB
Power supply: .................................................220-240 V~, 50 Hz
Power consumption: ......................................................... 1500 W
Protection class: ......................................................................... ΙI
Net weight: ........................................................... approx. 1.45 kg
The right to make technical and design modifications in the
course of continuous product development remains reserved.
This device has been tested according to all relevant current
CE guidelines, such as electromagnetic compatibility and low
voltage directives, and has been constructed in accordance
with the latest safety regulations.

Disposal

Meaning of the "Dustbin" Symbol
Protect our environment: do not dispose of
electrical equipment in the domestic waste.
Please return any electrical equipment that you
will no longer use to the collection points provided
for their disposal.
This helps avoid the potential effects of incorrect disposal on
the environment and human health.
This will contribute to the recycling and other forms of reutilisa-
tion of electrical and electronic equipment.
Information concerning where the equipment can be disposed
of can be obtained from your local authority.
29
17.05.18