Assembly / Disassembly - Gastrodomus MK225 Mode D'emploi

ASSEMBLY / DISASSEMBLY

The assembly / disassembly operations of every device of the machine are performed with the machine
stop and with the plug disconnected from the socket, or with the sectioning device in OFF.
The machine assembly goes on in different phases (for example it is showed the machine with base body).
TOOLS ASSEMBLY
MODEL MK225/225VF
1. Align and insert the coupling (5)
of the mixer (3) or of the wisk (7)
in the clutch (2) of the machine
body (1)
2. Screw the mixer (3) or of the
wisk (7) up to fasten it firmly to
the machine body (1)
TOOLS ASSEMBLY
MODELLO MK330/340/350
MODELLO MK430/440/450
1. Align and insert the tools
coupling (5) in the quick clutch
(2) of the motor body (1)
2. Turn the tools (3-4) up to fasten
them firmly to the machine body
(l)
The disassembly activities perform following in a backwards way the assembly phases previously described.
It is forbidden the use of the whisk tool in the fixed speed machines (MK225).
It is forbidden the whisk tool use in the machines with variable speed with the max speed function
.
WHISKS
ASSEMBLY/DISASSEMBLY
For the disassembly pull the whisks
(1) as soon as they don't part from
a reducer group (2).
To assemble them insert the whisks
basis (1) in the reducer group pivot
(2) and push thoroughly.
ORIGINAL INSTRUCTIONS TRANSLATION 21