audiophony MOJO 500Line Guide De L'utilisateur page 11

MOJO500Line - Amplified system with subwoofer and column + Bluetooth
Power switch
1-
2 - Fuse
Protects the power supply module and the built-in amplifier.
If need to replace the fuse, please make sure the new fuse has exactly the same characteristics.
3- Power input socket
Allows you to connect the speaker to an electrical outlet. Use the supplied IEC cord, and make sure the voltage
delivered by the outlet is in adequation with the value indicated by the voltage selector before turning on the built-in
amplifier.
4- Balanced line output
Output for link another system. The level is line and signal is master mixed.
5- Low equalizer
Allows you to equalize (+/- 15dB) the master Low signal.
6- High equalizer
Allows you to equalize (+/- 15dB) the master high signal.
7 - ON/LIMIT signal indicator
Allows you to check on the volumes
(PLEASE MAKE SURE EACH CHANNEL IS CONFIGURED IN ORDER TO PREVENT THIS INDICATOR FROM BEING
LIT).
8 Channels sound level
-
Allows you to adjust the sound level of each channel.
This setting also affects the main volume level of the amplification system.
(PLEASE MAKE SURE TO CONFIGURE IT IN ORDER TO PREVENT THE LIMIT FROM BEING LIT).
9 - Channels 1 to 3 input selector
Allows you to choose the type of source connected to each channel.
10 - Input connectors
CH1 and CH2 input via balanced COMBO
Connect here an XLR or JACK plug from a line level music instrument or a microphone. The signal of this mono input
is spread across the right and left output of the system.
CH3 inputs via RCA, stereo 3,5 Jack and Bluetooth
Connect a line level instrument via the RCA. The AUX input allows you to connect via stereo Jack 3.5 any extra line
level source as external player. The Bluetooth
11 Bluetooth ® pairing :
The "Pair" LED is blinking quickly in green to indicate that its searching a Bluetooth
On your smartphone or computer select the "MOJO500Line" in the list of the Bluetooth
The "Pair" LED must remain ON in green and a sound signal indicate that your device is connected.
The "Pair" knob can be use now to Play/pause your mp3 files.
Important : You can only connect one Bluetooth
the devices that you don't want to use. The last device get priority connexion.
Please make sure to properly configure the sound levels of your system. In addition to being unpleasant for
the audience, improper settings can damage your whole sound system.
The "LIMIT" indicators will light on when the maximum level is reached and must never be permanently lit.
CAUTION
Beyond this maximul level, the volume will not increase but will be distorted.
Moreover, your system can be destroyed by an excessive sound level despite of the internal electronic protections.
First, in order to prevent that, adjust the sound level via the Level of each channel.
Then, use the High/Low equalizer to adjust the acoustic as you wish.
If the sound output does not seem powerful enough, we strongly recommend to multiply the number of systems in
order to spread the sound output evenly.
®
® receiver is also on this channel.
® device on the MOJO500Line in the same time. You must disconnect
®
® connexion.
® devices to connect it.
English
Page 11