Space 6236 Instructions De Montage

Enlever toutes les pièces du carton, les organiser selon les numéros de pièce indiqués sur la
liste et s'assurer que les quantités des pièces reçues sont correctes.
ÉTAPE 1 Insérer les cinq roulettes (2) dans la base (1) et pousser fort jusqu'à ce que chaque roulette
(2) s'encliquette.
ÉTAPE 2 Attacher les bras (7L et 7R) au coussin du siège (5) en utilisant six vis longues à tête
Phillips (8). RESSERRER COMPLÈTEMENT LES VIS.
ÉTAPE 3 Attacher la plaque du siège (4) au coussin du siège (5) en utilisant quatre Vis courtes à tête
Phillips (9). RESSERRER COMPLÈTEMENT LES VIS.
ÉTAPE 4 Avec la base (1) debout et les roulettes (2) sur le plancher, insérer le vérin pneumatique
(3) dans la base (1). Placer le siège assemblé sur le dessus du vérin pneumatique (3) et pousser la
pression vers le bas.
Assembler le dossier monté (6) et la plaque du siège (4) et tourner le bouton dans
ÉTAPE 5
le sens des aiguilles d'une montre. VISSER LE BOUTON À FOND.
ATTENTION : VÉRIFIER QUE TOUS LES VIS SONT INSTALLÉS ET BIEN SERRÉS AVANT DE L'UTILISER.
ÉTAPE 1
1
8
2
x5
x3
7R
ÉTAPE 4
5
3
4
1
6236/6436 FAUTEUIL DE DIRECTION AIR GRID
DOUBLE FONCTION
INSTRUCTIONS DE MONTAGE
PIÈCE
1. Base . . . . . . . . . . . . . . . . . . . . . . . . . 1
2. Roulette . . . . . . . . . . . . . . . . . . . . . . 5
3. Vérin pneumatique . . . . . . . . . . . . . . 1
4. Plaque de siège . . . . . . . . . . . . . . . . 1
5. Coussin du siège . . . . . . . . . . . . . . . 1
6. Montage du dossier . . . . . . . . . . . . . 1
7. Bras gauche (7L) et droit (7R) . . . . . 2
8. Vis longues à tête Phillips (bras) . . . 6
9. Vis courtes à tête Phillips
(plaque du siège) . . . . . . . . . . . . . . . 4
ÉTAPE 2 ÉTAPE 3
8 x3 9
7L
5
ÉTAPE 5
6
Knob
QTÉ
1
3
2
x4
4
5
WARRANTY
SPACE ® chairs are warranted* from the date of purchase against failure due to material and workmanship as follows:
• Lifetime on component parts including pneumatic cylinder, control mechanism, base and casters.
• 3 Years on upholstery fabric and foam against wear and deterioration.
• Leather is not warranted against routine scratching and scuffing, as leather is subject to minor blemishes in use.
*All warranties are limited to the original purchaser for normal commercial usage defined as a standard forty hour work week by persons weighing 250 lbs. or
less. This warranty will not cover labor, freight or damage from misuse, abuse, negligence, alteration, accident, vandalism, rusting, acts of nature or any other
event beyond the control of Office Star Products. The warranty does not cover cosmetic damage that may result from normal use. Liability for incidental or
consequential damages is excluded. The user assumes all risk of injury resulting from use of this product. When usage is more than 40 hours per week, a five
year warranty on all parts applies. Fabric is warranted for one year.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
All SPACE ® chairs are built to meet or exceed ANSI BIFMA standards.
To make a warranty claim, contact Parts Department via e-mail parts@officestar.net, by Fax 1-909-930-5629, or toll free parts
number 1-800-950-7262, Monday through Friday 8:00 a.m. - 5:00 p.m. Pacific Time. Provide model number and description of the
problem and obtain confirmation number. At it's option Office Star Products will:
(a) Supply compatible components of current manufacture.
(b) Repair the customer's component.
It is the customer's responsibility to prepay freight on any components returned to the factory. Return freight on components
covered by warranty will be paid by Office Star Products.
6236/6436 DUAL FUNCTION AIR GRID
OPERATING INSTRUCTIONS
4
5
6236
4
5
1
3
2
6436
MANAGERS CHAIR
FEATURES
• PNEUMATIC SEAT HEIGHT ADJUSTMENT
To raise seat remove pressure from seat and pull lever (1) up.
To lower seat height sit on chair and pull lever (1) up.
NOTE: It is normal for chair to slightly lower under
body weight.
• SEAT TILT ADJUSTMENT
To adjust seat tilt, lift lever (2). Leave lever up for free float
or push lever down to lock at any angle.
• BACK ANGLE ADJUSTMENT
To adjust Back angle lift lever (3). Leave lever up for free
float or push lever down to lock.
• ARM HEIGHT ADJUSTMENT
To adjust arm height, push button (4) in to allow the arms
to move up or down freely. Release the button (4) once the
desired height is reached.
• TILT TENSION ADJUSTMENT
For individual comfort, this chair has been equipped with an
adjustment that will allow the user to change the tension of the
tilting feature. Turn knob (5) clockwise to increase tension and
counter-clockwise to decrease or ease the tension.
NOTE: Be careful not to loosen back tilt adjustment knob
completely.
WARNING
1. Use this product only one person at a time.
2. Do not use this chair unless all bolts screws and knobs are
securely tightened.
3. Check that all bolts screws and knobs are tight every three
months or as needed.
4. Do not overturn back tilt knob when decreasing tension.
5. Dispose of packing material properly. Do not use plastic
cover as head covering. It may cause suffocation.
6. Do not use chair as a stepladder.
7. Use this chair for its intended purpose only.
8. Use mild detergent only for cleaning.
© Office Star Products June 2006