How To Use - steelplay NS-10000 Manuel D'utilisation

vPlease dispose of batteries according to local regulations and recycle where possible. Do not dispose of batteries as household waste. Li-polymer batteries
can easily rupture, ignite, or explode when exposed to high temperatures, or direct sunlight. Do not charge under pillows or blankets. The product should
not be stored in a car during hot weather. Short-circuiting a Li-polymer battery can also cause it to ignite or explode. Never open a Li-polymer battery's casing.
Li-Polymer batteries contain safety devices that, protect the cells inside from abuse. If damaged, these can cause the battery to ignite or explode. If you
plan to not use the power bank for a long period of time (more than 3 months), please follow these long-term preservation of the battery instructions: Keep
the battery level at 50% of its capacity, store the product in a cool dry place (storage temperature: -10~40°C), avoid contacts with corrosive substances
and keep it away from fire, heat and water.
ABOUT STEELPLAY® POWERBANK
Steelplay® Powerbank is an external backup battery. It enables to recharge your console anywhere and at any time. With Steelplay® Travel Powerbank,
quickly increase your play time and play up to 2 times longer!
CONTENT
•
1 micro USB Cable
• 1 x Steelplay® Power Bank
• 1 x User manual
Features
• Play up to 2 times longer (the play extension varies according to the game used)
• Capacity: 10 000 mHa
• 1.5 m micro USB charging cable included
• Protective case folding on the screen
• Folded back, the holster also serves as a support to keep the console straight
• 2 battery charging ports : 1 type C and 1 micro USB
• 1 USB port to charge another device
• Light Charging Light
• ON/OFF button
Specifications
• Capacity: 10 000mAh
• Battery type: Li-polymer
• Input: DC5V/2.A
• Output:DC5V/2.A
• Size: 172 x 105 x 30 mm

HOW TO USE

Before the first use, please ensure that you fully charge the power bank.
To charge the power bank:
1. Carefully connect the micro USB cable (included) to your console and to a free USB port on your PC (on) or to an AC adapter. You can also charge the
battery with a power cable (not supplied).
2. The 4 LEDs blink. When all are turned on and no longer blinking, the battery is fully charged.
Note: The 4 power indicators on the power bank will turn into green when finish charging.
To charge your console :
1. Press the battery power button (located at the bottom of the battery). The lights illuminate.
2. Carefully insert the console between the battery chocks, making sure to center it.
3. Carefully insert the USB type C connector at the bottom of the battery in the corresponding port of your console.
4. The charge indicator on your console is active and you can continue playing.
5. Fold the tab back and snap it to the back of the battery
6. To remove the console from the battery, be sure to first carefully remove the connector plugged into the console. Then carefully remove the console from
the top by keeping your thumbs on the top hold.
Note: Do not wait for your console to be completely discharged to use the battery backup.
For troubleshooting, contact us at sav@ecdist.com.