Declaration Of Ce-Conformity - CET WALTHER PILOT TERRA Mode D'emploi

Declaration of CE-Conformity

We, the manufacturers of the equipment, hereby declare under our sole respon-
sibility that the product(s) described below conform to the essential safety require-
ments. This declaration will be rendered invalid if any changes are made to the equip-
ment without prior consultation with us.
Manufacturer
Type Designation
Intended purpose
Applied Standards and Directives
EU-Mechanical Engineering Directives 2006 / 42 / EC
94 / 9 EC (ATEX Directives)
DIN EN ISO 12100-1
DIN EN ISO 12100-2
EN 1127-1
Specification according 94 / 9 / EC
Category 2
Authorized with the compilation of the technical file:
Nico Kowalski, WALTHER Spritz- und Lackiersysteme GmbH, Kärntner Str. 18 - 30
D- 42327 Wuppertal
Special remarks :
The named product is intended for installation in other equipment. Commissioning is
prohibited until such time as the end product has been proved to conform to the
provision of the Directives 2006 / 42 / EC.
Wuppertal, the 1st of April 2014
p.p.
Name: Torsten Bröker
Position: Manager, Design and Development
This Declaration does not give assurance of properties in the sense of product liability. The safe-
ty instructions provided in the product documentation must be observed at all times.
WALTHER Spritz- und Lackiersysteme GmbH
Kärntner Str. 18 - 30
D - 42327 Wuppertal
Tel.: +49(0)202 / 787 - 0
Fax: +49(0)202 / 787 - 2217
www.walther-pilot.de • e-mail: info@walther-pilot.de
Manual Spray Guns PILOT TERRA
PILOT TERRA
PILOT TERRA
PILOT TERRA-LVLP
PILOT TERRA-LVLP
Processing of sprayable media
Part marking
Gravity-Feed Cup
Material Connection
Gravity-Feed Cup
Material Connection
DIN EN 1953
DIN EN 13463-1
II 2 G c T 6
21
V 11 801
V 11 802
V 11 811
V 11 812
Tech.File,Ref.:
2417