Operation; How To Set The Clock; How To Delay The Brew Cycle - Franklin Chef FR1730 Mode D'emploi

•
Auto Start Light - This LED indicates the coffee maker is in a
delayed brewing cycle mode, awaiting preset brew time.
•
Power Select (Start/Stop) Button - This button controls three
power modes: ON/OFF/AUTO. The OFF mode does not have a
light indicator.

How to Set the Clock

To set the correct time of day, first press the Hour Advance Button
until the correct hour has been reached. Then, press the Minute
Advance Button until the correct minutes have been reached. Use
the AM/PM indicator on the left side of the digital read-out when
setting the time.
Note: Disconnecting the AC line cord from the wall outlet causes
the time setting to be lost. The unit resets the clock to a flashing
12:00 when it is plugged in again after having been disconnected.

How to Delay the Brew Cycle

To preset your coffee maker to brew at a later time, first verify that the
clock is set to the correct time. See section on " How to Set the Clock" .
Press and hold the Brew Preset Button. While continuing to hold the
Brew Preset Button, press the Hour Advance Button until the
desired delayed brew time hour is reached. Then press the Minute
Advance Button until the desired minute has been reached. The AM
and PM indicators are on the left side of the digital clock readout.
Release the Brew Preset Button.
Press the Power Select Button once. The Auto Start Light will
illuminate, indicating that the coffee maker is waiting for the preset
brew time to be reached before beginning the brewing cycle.
Note: lf the Power Select Button is pressed before the Brew Preset
Button, the brewing cycle delay feature will not activate.

Operation

7