Publicité
Les langues disponibles
Les langues disponibles
1074, Avenue des Carrières – Z.A la Plaine du Caire III
13830 ROQUEFORT LA BEDOULE – FRANCE
.
.
-
-
:
WWW
ERMAX
FR
E
MAIL
ACCUEIL
Fitting kit
- 1 adhesive pad
- 1 plastic collar
- 3 plastic washers Ø6
- 5cm adhesive foam, thickness 5mm
Width 10mm
Fitting instructions
- Remove the original rear hugger and keep the fitting screws. Take off the bracket that secures the
brake-hose.
- Glue the adhesive pad and foam on the Ermax rear hugger (see picture).
: Adhesive pad location
: Adhesive foam location
- Place the Ermax rear hugger and fix it with the original screws and the provided plastic washers.
Control the hugger is well centered with the tire before tightening the screws.
- Secure the brake-hose with the supplied plastic ring placed on the adhesive pad to avoid vibrations
noises.
* Painted and varnished parts are not guaranteed against high pressure steam washes or aggressive cleaning products which can damage them and unstuck the varnish. We advise moreover, according to the technical data of our
painting suppliers, to wait one month to obtain a complete polymerization of varnish.
* Accessories gone up on the motorbike will not be any more considered as new and will be neither retaken nor exchanged.
* Ermax accessories are foreseen for original equipments. They will not be guaranteed if they are used in others conditions.
* Due to vehicles made tolerances, beyond our control, some Ermax products might need adjustings to fit.
* The mentioned label of motorbikes's manufacturers are indicated exclusively as a reference to Ermax accessories.
* Care to excessive clampings which may damage or break our plastic accessories and aluminium screws.
* A few tyres, faithful to ETRTO standards, may be in fact bigger and higher than dimensions engraved on the tyre (until + 10 mm). They may be not compatible with undertrays and rear huggers which we made with original
tyres and whose dimensions correspond to these ones engraved on tyre.
* Harden the rear shock absorber while drivings with load or on dented roads.
@
.
ERMAX
FR
FITTING INSTRUCTIONS
ADAPTABLE ON Z650 / NINJA 650 2017 → ∞
Original tire: Dunlop Sportmax D214 in 160/60 ZR 17
« CAUTION »
Update : 12/06/17
ERMAX REAR HUGGER
EN
Publicité
