Installing The Product - OBI Cirella 850606 Mode D'emploi D'origine

850606_850607_850608_850609.book Seite 17 Dienstag, 27. Mai 2014 4:16 16
• All components of the product, in
particular the safety mechanisms, must
be assembled correctly in order to ensure
trouble-free operation.
• Conversions, independent modifications
and the use of non-approved parts are
not permitted.
• The product may only be used when it
functions properly. If the product or a
component of the product is defective, it
must be repaired by a professional
electrician.
• Only allow repairs to be carried out by a
professional electrician. Unprofessional
repairs may mean that liquid enters into
the electrics of the product.
• Only use bulbs authorised by the
manufacturer. The maximum bulb
performance may not be exceeded (see
Technical data).
• Main power voltage and fuse must
correspond to the Technical data.
• The fuse must be a residual current
circuit-breaker with a measured residual
current of a maximum of 30 mA.
• Never use the product in a room where
there is a danger of explosion or in the
vicinity of flammable liquids or gases.
The product may not be used
outdoors or in wet rooms. The
product may only be used in dry
indoor areas.
• When drilling into walls, ceilings or floors
pay attention to cables as well as to gas
and water pipes.
• The electrical connection may only be
carried out by an appropriately qualified
professional.
• Only use connection clamps permitted
by the manufacturer.
• The product must be mounted out of
arm's reach. (A height of at least 2.5 m).
DANGER
Risk of burning!
Bulbs and the product itself will
become hot when in use.
– Do not touch
– Keep children away
– Before changing the bulb, allow
to cool.
DANGER
Danger of fire!
Do not cover bulb and product.
There is a risk of fire if covered with
flammable materials (for example, a
cloth)!
The specified minimum distance to
radiated surfaces or materials must
be maintained. See the section on
"Technical data" for the minimum
distance.
Installation

Installing the product

DANGER
Risk to life!
The electrical connection may only
be carried out by an appropriately
qualified professional.
Before installation, switch off the
power to the electrical network
(switch off at the main switch/fuse
box).
DANGER
Danger of fire!
The specified minimum distance to
radiated surfaces or materials must
be maintained.
See the section on "Technical data"
for the minimum distance.
When installing, pay attention to the version
of your product.
GB
17