Care And Cleaning Instructions; Cooking Tips - Nesco ES-08 Manuel De L'utilisateur

Masquer les pouces Voir aussi pour ES-08:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

6. Place food directly onto cooking surface and cook to desired doneness.
7. When finished cooking, turn controller to OFF and remove plug from power
outlet.IMPORTANT: To avoid injury wait until the appliance has cooled before
removing the temperature controller.
NOTE: If heating oil, always leave the lid off. If oil smokes, immediately turn skillet
"OFF" and allow to cool.
1. Turn temperature controller to OFF and unplug cord from power outlet.
2. Always allow grill to cool completely before cleaning and removing temperature
controller.
3. Remove the temperature controller from unit and wipe clean with a dry towel.
NEVER IMMERSE TEMPERATURE CONTROLLER IN WATER OR ANY OTHER
LIQUID.
4. Allow base to cool completely before cleaning. Absorb any excess water or grease
from base with a paper towel.
5. Immerse the skillet and lid in warm, soapy water and wash with a soft cloth. Rinse
well and dry. All parts, except the temperature controller, are fully immersible and
dishwasher safe.
6. NOTE: Do Not use steel wool, abrasive cleaners, or metal scouring pads on
cooking surfaces as this will damage the non-stick coating.
• Before using the skillet for the first time, lightly brush cooking surface with
vegetable oil. Heat, uncovered, to 300°F. Turn"OFF" and cool completely. Wipe
away excess oil.
• Metal utensils may scratch the non-stick surface.
• This skillet is not designed to deep fry. To pan-fry, do not use more than 1 cup of
oil. Select a vegetable oil or peanut oil for frying. Butter and olive oil should only
be used to sauté foods on a lower temperature setting.
Operation (continued)

Care and Cleaning Instructions

Cooking Tips

3

Publicité

Table des Matières
loading

Table des Matières