Getting Started - Daikin EKRTWA Manuel D'utilisation

1D_OM_4PW56102-1.book Page 5 Thursday, August 27, 2009 10:52 AM

3. Getting started

3.1. Setting the clock and date
After installation you first need to set the clock before you can
actually use the thermostat.
1 Activate the advanced mode by pressing
seconds in OFF mode (
Refer also to "Description of the function modes and menus"
on page 7.
2 Navigate to the date and clock setting menu (
> =
and then press
3 Set the hour, minutes, day of the week (
I
= Tuesday,...), day, month and year by pressing
-
and confirm each time by pressing
The value that you modify flashes.
3.2. Setting the desired mode: heating or cooling
This is only possible if cooling mode is available.
NOTE
<
1 Press to go to comfort mode (
<
2 Press during 5 seconds to go to the heating/cooling
selection mode.
< >
3 Press or to switch to the desired mode.
O P
or is flashing.
=
4 Press to save your selection.
The thermostat returns to the schedule timer mode (
EKRTWA
Room thermostat
4PW56102-1
>
during 5
D
).
G
) by pressing
.
&
= Monday,
+
=
.
A
).
B
Operation manual
or
).
5