Miele 07869810 Notice De Montage page 30

Produktgruppe 512
30 von 32
am
Parts required
Quantity Mat. no.
1 07869810
1 07869840
1 07869850
Note
This service and repair work should only be carried out by a suitably qualified electrician (with specialist
training, knowledge and experience, and recent related work experience) in accordance with all appropriate
local and national safety regulations.
Servicing, modification, testing and maintenance of electrical appliances should only be carried out in
accordance with all appropriate legal requirements, accident prevention regulations and valid standards. All
regulations of the appropriate utility supply companies and standards relating to safety (not limited to electrical
safety) are to be complied with.
Danger!
Even with the machine switched off, voltage may be applied to some components.
Before starting any service work, the machine must be disconnected from the power supply. Suitable
measurements must be made to ensure that this is the case.
A general visual check and risk evaluation should always be carried out.
Incorrect conversion or service work can be dangerous (risk of fire, electric shock, etc.).
Danger!
Correct grounding function can be deactivated if casing parts are incorrectly assembled.
Correct grounding function must be ensured when re-installing the casing.
Carry out appropriate electrical safety checks.
Danger!
During installation, all accessible conductive parts that are not connected to ground must not have any link to
ground (strengthened double insulation).
To confirm this, insulation resistance and touch current measurements must be carried out.
24.01.2012 Diese Unterlagen dürfen ohne unsere Genehmigung weder vervielfältigt noch Dritten zugänglich gemacht werden. Eigentumsrechte vorbehalten.
Umbau- und Montageanweisung
Designation
Installation kit - Wall seal, 16 kg model, PW 6163
or
Installation kit - Wall seal, 24 kg model, PW 6243
or
Installation kit - Wall seal, 32 kg model, PW 6323
M.-Nr. 07822940