Publicité
Declaration of Conformity
We, EATON Industries (Austria) GmbH
3943 Schrems, Eugenia 1
Austria
declare under our sole responsibility that the product (family)
Eaton - Routing Actuator,
CROU-00/01-S, CROU-00/01-SL (contains RF-Modul
CSCZ-01/xx)
(the declaration of conformity applies to all
listed types within our actual product catalogue)
provided that it is installed, maintained and used in the
application intended for, with respect to the relevant manufacturers
instructions, installation standards and "good engineering practices"
complies with the provisions of Council directive(s):
RED Directive 2014/53/EU
RoHS Directive 2011/65/EU
based on compliance with following standard(s):
EN301489-3 V2.1.1, EN300220-2 V3.1.1, EN50428/05 + A1/07 + A2/09;
EN60669-2-1/10, EN50491-5-1/10, EN50491-5-2/10, EN60950-1/06 +
A11/09 + A1/10 + A12/11 + A2/13, EN62479/10
tested by:
TÜV Austria Services GmbH, Notified Body
1230 Vienna, Deutschstrasse 10, Austria
Affixing date of CE mark: 2014
Doc.Id.: CROU-0001-S_CROU-0001-SL_120617
Fernando Ceccarelli
Senior Vice President
General Manager
4
12.06.2017
Friedrich Schröder
Director Quality
& Systems
Publicité
