Thermostat Setting/Maintenance; Shower Functions Setting - PHARO DP Prestige ML Instructions De Montage

Thermostat Setting
1
1 Set Quattrostat to "Hand shower".
2 Open Quattrostat, adjust thermostat to 38°C.
3 Loosen the screw and remove thermostat handle.
4 Push thermostat grip on and align vertically (red button points upwards), screw tight
Maintenance
The non return valves must be checked regularly according
to DIN EN 1717 in accordance with national or regional
regulations (at least once a year).

Shower Functions Setting

+
1 2 
1 Normal spray
2 Massage jet
3 Normal spray +
Thermostat Setting/Maintenance/Shower Functions Setting
2
non return valves
1 Rain jet
2 Mix 1
3 Balance
4 Mix 2
5 Whirl jet
3
If the water flow drops the filters need to be cleaned!
Filter
1 2
4
  
2