Bluetooth ® Pairing - Hama 00183274 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Note
• For some vehicle types, the ignition
has to be switched on to supply
power to the 12 V car socket.
For more information, please
refer to your vehicle's operating
instructions.
• Disconnect all cable and on-board
connections after use.
4.1 Bluetooth
®
Note
• Check whether your mobile device
(MP3 player, mobile phone, etc.) is
Bluetooth
capable.
®
• If not, the only way you can use the
FM transmitter for playback is with
a USB stick or microSD card.
• Note that the maximum range for
Bluetooth
is 10 metres without
®
obstacles such as walls, people,
etc.
• Make sure that your Bluetooth
capable terminal device is on and
Bluetooth
is activated.
®
• Plug the FM transmitter into a car
socket located near the car radio.
• Make sure that the FM transmitter is
within the maximum Bluetooth
of 10 metres.
• Open the Bluetooth
terminal device and wait until BT10
appears in the list of Bluetooth
devices found.
• Select BT10 and wait until the FM
transmitter is listed as connected in the
Bluetooth
settings on your terminal
®
device. A transmission frequency is
now shown on the display.
pairing
®
®
settings on your
®
®
Some terminal devices require a
password in order to connect to
another Bluetooth
• If your terminal device requests
a password for connection to the
speaker, enter 0000.
After the FM transmitter and terminal
device have been paired, a connection
is established automatically. If
the Bluetooth
established automatically, check the
following:
• Check the Bluetooth
your terminal device to see whether
BT10 is connected. If not, repeat
the steps listed under Bluetooth
pairing.
• Check whether your terminal device
and the FM transmitter are less
than 10 metres apart. If not, move
the devices closer together.
• Check whether obstacles are
impairing the range. If so, move
the devices closer together.
4.2 Audio playback (via Bluetooth
range
Start and control audio playback on the
connected terminal device accordingly.
Alternatively, audio playback can also be
controlled on the FM transmitter (if the
connected device supports this function).
• Press the
pause audio playback.
• Press the
forward one title.
• Press the
backward one title.
Note – Bluetooth
password
device.
®
Note – Connection impaired
connection is not
®
function button to start or
function button to jump
function button to jump
®
settings of
®
®
)
®
3

Publicité

Table des Matières
loading

Table des Matières