Publicité
dbac-101
EN
EVAPORATOR
6- To run piping and wiring to the outside of
the cabin, if necessary, make (2) Ø 35 holes
and insert feedthroughs provided in them,
then run piping and wiring through them to
the outside.
7- Insert PVC Ø 9 x Ø 13 pipe in the Ø 12 x
Ø 16 PVC pipe and stick with loctite.
8- Insert PVC pipe in the evaporator drain pipe
and guide to the outside (if necessary make
a Ø 22 hole and place a feedthrough to run
the drainpipe outside.
Caution: The drainpipe should have enough
drop to allow water drainage and be free of
loops and kinks.
9- Cut drainpipe to the desired size and place
drain valve. Secure with cable ties.
6
12
7
9
®
8
Publicité
