Parental Settings Menu Operation (*); Timers; Setting Sleep Timer; Setting Programme Timers - Hoher H 32 LX 350D Mode D'emploi

Parental Settings Menu Operation
• Select an item by using "
• Use " " or " " button to set an item.
• Press OK button to view more options.
(*) If you set Country option as UK in the first time
installation, Maturity Lock and Child Lock options
will not be visible. This setting is available only for
EU countries.
Menu Lock (optional): Menu lock setting enables or
disables the menu access. You can disable access to
the installation menu or the whole menu system.
Maturity Lock: When set, this option gets the maturity
information from the broadcast and if this maturity level
is disabled, disables access to the broadcast. Default
value is set to Age 18.
Child Lock (optional): When Child Lock is set, the
TV can only be controlled by the remote control. In
this case the control panel buttons will not work,
except for the Standby/On button. When Child Lock
is activated you are able to switch the TV into Standby
mode with the Standby/On button. To switch the TV
on again, you need the remote control. Hence, if one
of those buttons is pressed, Child Lock Is On will
be displayed on the screen when the menu screen
is not visible.
Set PIN: Defines a new PIN number. Use numeric
buttons to enter a new pin number. You will need
to code your new pin a second time for verification
purposes.
IMPORTANT: The factory default pin number is 4725,
if you change the pin number make sure you write it
down and keep it safe.
(*)
" or " " button.
English - 55 -

Timers

To view Timers menu, press "MENU" button and
select Channel List icon by using " " or " " button.
Press OK button to view Channel List menu. Use "
" or " " button to highlight Timers and press OK
to continue:

Setting Sleep Timer

This setting is used for setting the TV to turn off after
a certain time.
• Highlight Sleep Timer by using "
• Use " " or " " button to set. The timer can be
programmed between Off and 2.00 hours (120
minutes) in steps of 30 minutes.

Setting Programme Timers

You can set programme timers for a particular
programme using this feature.
Press " " button to set timers on an event. Programme
timer function buttons will be displayed on the
screen.

Adding a Timer

• Press YELLOW button on the remote control to
add a timer. The following menu appears on the
screen:
Channel: Changes channel by using " " or " ".
Timer Type: This feature is unavailable to be set.
Date: Enter a date using the numeric buttons.
Start: Enter a starting time using the numeric
buttons.
End: Enter an ending time using the numeric
buttons.
Duration: Displays duration between the starting and
ending time.
Mode: Sets a timer to be repeated as Once, Daily or
Weekly. Use " " or " " buttons to select an option.
• Press GREEN button to save the timer. Press RED
button to cancel.
Change/Delete:Controls parental settings on timers.

Editing a Timer

• Select the timer you want to edit by pressing "
or " " button.
• Press GREEN button. Edit Timer menu screen will
be displayed.
• When finished with editing, press
save. You can press "MENU" button to cancel.

Deleting a Timer

• Select the timer you want to delete by pressing "
" or " " button.
• Press RED button.
" or " " button.
"
GREEN button to