Pc Setting - Picture Position, Clock Phase, Sampling Clock, Reset - Toshiba REGZA WL66 Série Manuel De L'utilisateur

PC settings – picture position, clock phase,
Picture position
The picture position may be adjusted to suit personal
preference.
Press to select PC, then select PC Setting
B
1
from the SET UP menu.
SET UP
Language
Country
AV connection
PC Setting
Back
MENU EXIT
Press OK. Press up and down to select an option,
2
then left or right to adjust the settings.
PC Settings
Horizontal position
Horizontal width
Vertical position
Vertical height
Clock phase
Sampling clock
MENU Back EXIT
Clock phase
The Clock phase matches the PC signal with the LCD
display. Adjusting this can clear horizontal stripes and
picture blur.
In the SET UP menu press down until PC Setting
1
is highlighted.
Press OK to select, then down to highlight Clock
2
phase.
Use left or right to adjust until the picture clears.
3
sampling clock, reset
English
UK
OK
OK
Watch TV
1/2
0
– 5
0
– 5
0
0
Watch TV
Adjusting the Sampling clock alters the number of pulses
per scan, this will clear vertical lines on the screen.
In the SET UP menu press down until PC Setting
1
is highlighted.
Press OK to select, then down to highlight
2
Sampling clock.
Horizontal position
Horizontal width
Vertical position
Vertical height
Clock phase
Sampling clock
Back
MENU
Use left or right to adjust until the picture clears.
3
To return to the original factory settings.
In the SET UP menu press down until PC Setting
1
is highlighted.
Press OK to select, then down to highlight Reset.
2
Reset
MENU Back
Press OK.
3
21
Sampling clock
PC Settings
0
– 5
0
– 5
0
0
Watch TV
EXIT
Reset
PC Settings
OK
EXIT Watch TV
1/2
2/2