System Requirements; Product Setup - D-Link DCS-5020L Guide D'installation

sysTem reQuiremeNTs

• 802.11ac/n/g/a router
• A broadband Internet connection
• iPhone, iPad, Android, or Windows smartphone or tablet (please refer to the mobile app's store page
to check whether your device is compatible)

ProDuCT seTuP

WiNDoWs user
Step 1:
Connect the included Ethernet cable to the network cable connector located on the rear panel of the
DCS-5020L and attach it to the network.
Step 2:
Attach the external power supply to the DC power input connector located on the rear panel of the
DCS-5020L and connect it to your wall outlet or power strip. Power is confirmed when the green LED
Power Indicator located below the lens is lit.
Step 3:
Insert the DCS-5020L Driver CD in the CD-ROM drive. If the CD Autorun function does not
automatically start on your computer, go to Start > Run. In the run box type D:\autorun.exe (where D:
represents the drive letter of your CD-ROM drive) and click OK. When the autorun screen appears,
click Set up your Cloud Camera and follow the on-screen instructions.
Step 4:
Click on the Start button to start the wizard, and follow the instructions from the Installation Wizard to
finish setting up your camera.
2
DCs-5020l