Technical Data; Assembly And Installation - Petromax fa1 Mode D'emploi

DESCRIPTION AND SCOPE OF
DELIVERY (FIGURE 1)
1. 1 x punch
2. 1 x ground anchor
3. 1 x arm with grilling grate and notch
4. 2 x arms with notches for hanging
5. 1 x central pole
6. 4 x screws for attaching the grilling grate
(no illustration)
7. 1 x Allen wrench (no illustration)

TECHNICAL DATA

• Total height with ground anchor: 40.75 in
• Height over the ground: 32.87 in
• Length of ground anchor: 7.87 in
• Length of arm with grilling grate and notch:
26.18 in
• Length of arms with 3 notches: 26.18 in
• Measures of grilling grate: 15.35 x 15.35 in
• Material of Fire Anchor: steel,
powder-coated
• Material of grilling grate: steel, chrome-
plated
• Weight (total): 14.8 lbs

ASSEMBLY AND INSTALLATION

1. Place the punch (1) in the drilling of the
ground anchor (2).
2. Hold the ground anchor in an upright po-
sition at the place where you wish to insert
it into the ground.
3. Sink the ground anchor into the ground by
means of a hammer.
4. Remove the punch and stow it away safely
until next use.
5. Put the central pole (5) into the ground
anchor and turn it until it engages. This will
avoid the pole to turn by itself.
6. Fit the grilling grate to the arm (3) intended
for that purpose by means of the Allen
wrench (7) provided.
7. Attach the arms (4) as desired. Tilt them
slightly for easier attachment.
USE AND DISASSEMBLY
Before inserting the Fire Anchor into the
ground, always check beforehand whether the
consistency of the soil is solid enough for the
Fire Anchor in order to have enough stability. A
sandy soil, for example, is not suited.
6
Figure 1
Moreover, you should always make sure not
to burden the Fire Anchor in a one-sided way
so that it cannot tip over. Make sure that the
weight is adequately balanced on one of the
other arms when you are cooking with Dutch
Ovens or similar cookware. The loads should
not exceed the following weights (Figure 2):
• Load on first notch (4a): 11.02 lb or
• Load on second notch (4b): 22.05 lb or
• Load on third notch (4c): 33.07 lb
• Load on arm with grilling grate: 11.02 lb
Figure 2
Utilisation of the Fire Anchor can modify the
coating (colour, characteristics, structure, etc.)
due to heat exposure. Moreover, scratches
or slivers are to be expected when moving
the arms. This does not impair the proper
functioning of the product in any way. For
disassembling the Fire Anchor you must first
remove all arms from the central pole. Then
pull the central pole out of the ground anchor
and push it sideways through the two holes on
5
4
3
6
2
1