Genesis GWL1265F Manuel D'utilisation page 3

KNOWING YOUR WORK LIGHT
2
5
4
OPERATION
ROTATING FRAME
The rotating frame (2) can rotate up to 180° against the supporting frame (1). It converts the work light from a
folded position for storage to a working position. See FIG 1.
ADJUSTING THE LIGHT DIRECTION
The light head can rotate 360°.
To Adjust the Light Direction,
and retighten knobs.
ON/OFF SWITCH
Your portable work light has a On/Off switch (6) located on the back side of the work light. Press the "I" to turn on
the work light. Press the "O" to turn it off. Always turn the work light off before unplugging.
MAINTENANCE
Your work light requires very little care and maintenance. Simply clean the lens regularly with a non-abrasive
cleaner. Use the similar care for the stand.
WARNING:
completely cool before attempting to clean it.
1.
Supporting Frame
2.
Rotating Frame
3.
Lens
4.
LEDs
loosen the side locking knobs (5). Adjust the work light head to desired position,
Always make sure the work light is unplugged and
1
6
5
3
5.
Side Locking Knobs
6.
On/Off Switch
7.
Power Cord
7
FIG 1
3