emerio Smart Fryer AF-124802.1 Mode D'emploi page 7

BEFORE USE
First read all instructions before use and retain the manual for later reference. Only plug this appliance into an
earthed socket. Before first use, remove the packing materials. Clean the basket and frying grill. (See "cleaning
and maintenance") Wipe inside and outside of the appliance with a soft cloth. Make sure that the electrical
parts remain dry. This appliance heats food at all directions and most of the ingredients do not need any oil.
Note: Always use the frying grill with the silicone cases attached. They will help to stabilize the frying grill in
the basket during cooking.
USE
1. Place the appliance on a dry, stable and heat-resistant surface.
2. Since the appliance becomes hot during use, make sure that it is not too close to other objects.
3. Pull out the basket from the appliance by the basket handle. Put the frying grill into the basket.
4. Place the ingredients into the basket. Slide the basket into the appliance. Make sure they are placed
correctly and closed completely. Otherwise the appliance will not work. Caution: Do not touch the basket
during use or after use in short time as it gets very hot. Only hold the basket by the handle.
5. Connect the power plug to a suitable outlet. The machine is now standby.
Press the on/off button once. Then press "＋" or "－" to set your desired temperature (10 ℃ / press) and
6.
time (1 minute / press) for the ingredients. You can also long press "＋" or "－" for rapid adjustment.
7. You can also press the menu selection button to directly choose the cooking functions among chips, steak,
shrimps, cake, chicken, meat and fish. If you wish to adjust the time and temperature a little, please press
"＋" or "－" to make adjustment.
8. Press the on/off button again; the machine starts working. When the appliance is working, the indicator
light turns on with the outer circle flashing. The centre red light will turns on and off automatically, which
shows that the heating components are turning on and off automatically to maintain the set temperature.
9. When the whole cooking process is finished, the blower will stop working. You can also manually turn off
the machine by pressing the on/off button. The blower will stop in a few seconds.
10. Pull out the basket from the appliance by the basket handle. Check if the ingredients are ready. If not,
simply slide the basket back into the appliance. Set the temperature and the timer to a few extra minutes.
Then press the on/off button to run the machine again. NOTE: You can also pull out the basket to check
and shake the ingredients during cooking process. When you slide back the basket, the machine will
continue to work with the selected setting.
11. Empty the basket, putting the food into a bowl or onto a plate. To remove large or fragile ingredients, lift
the ingredients out of the basket by a pair of tongs.
To remove ingredients (e.g. beef, chicken, meat, any ingredients with original oil and will have excess oil
from ingredients collected on the bottom of the basket), please use tongs to pick ingredients one by one.
To remove ingredients (e.g. chips, vegetable or ingredients with no excess oil from the ingredients),
please pull out the basket, and pour ingredients to tableware.
12. After the cooking is done, the appliance is instantly ready for preparing another batch of ingredients if
needed.
Heat Preservation Function
The appliance has a heat preservation function. Press the button "
heat for 120 minutes.
", and the appliance will preserve the
- 6 -