Xiaomi Mi Smart Antibacterial Humidifier Manuel D'utilisation page 11

Precautions
Do not place the water tank directly on a table or floor. Empty it before placing it separately.
Power Cord
To avoid fire, electric shocks, or other damage, use the power cord and power outlet as instructed below:
The power cord must be plugged into a suitable power outlet.
Do not pull the power cord.
Always unplug the humidifier before carrying out any maintenance or moving it.
Water Tank
Do not add essential oil, perfume, or disinfectant into the water tank to avoid causing damage to the product or
personal injury.
Do not add any water over 40°C into the water tank and water conduits so as to avoid damage to the humidifier.
Do not allow water to flow into the base via the air outlet. If there is water on the base, wipe it off with a dry cloth
so as to avoid damage to the humidifier.
Do not use the humidifier in environments where the temperature is below 0°C, as the water in the tank may
freeze and cause damage to the humidifier. Always empty the water from the water tank and the water conduits
in such harsh environments.
Do not place any metal objects, nor add chemicals or detergent into the water conduits. Otherwise, it will cause
unhealthy vaporization.
Always turn off and unplug the humidifier before pouring out the water from the water conduits.
Adding Water
Unplug the humidifier when adding water or cleaning it.
Do not add water via the mist outlet and the air outlet.
Do not exceed the maximum water level mark when adding water.
During Use
Once the humidifier is turned on, the UV light is on and the sterilization function is enabled. Once the
humidifier is turned off, the UV light is off and the sterilization function is disabled.
The UV light is equipped with a cover so as to prevent UV light leakage during use. The cover can be
removed for cleaning.
Immediately stop using the humidifier if it makes unusual sounds, gives off bad odors, or overheats.
10