Opus Technologies OP-FSM Manuel D'installation page 17

2. OP-FSM presentation
2.1 Description
The OP-FSM is an ideal solution for measuring,
adjusting and commissioning
induction loop system in accordance with the IEC
60118-4 specification.
This manual and
instrument has two calibrated measuring
functions and two types of filters for removing
background noise and magnetic field intensity.
Using a headset, the OP-FSM allows you to listen
to and control the installation of your magnetic
loop.
2.2 The range
The Opus Technologies range of loop amplifiers
is a wide range offering high performance
magnetic loop amplifiers for small, medium and
large rooms.
The quality and rigor of Opus Technologies
solutions makes it possible to meet the
international standard
offering innovative products.
2.2 The contente
Upon receipt of the meter, inspect the unit for
any damage that may have occurred during
transport. If it is damaged notify your distributor
and the shipping
indicating the delivery date, the nature of the
damage and if no damage was visible on the
packaging before unpacking. If possible give the
delivery slip number and a tracking number.
Manuel d'utilisation - User Manual
a magnetic
ergonomic measuring
IEC-60118-4 while
company immediately,
Content:
• An OP-FSM field meter
• CD restoring the different sinusoidal test
signals from 100Hz to 6KHz.
• Installation instructions
2.4 Advise and security
Use only LR06 type batteries.
Do not put the meter in contact with water.
Infiltration of water in the case can damage the
electrical components that compose it.
Do not keep the device outdoors.
Use only a dry cloth - never use cleaning agents
or water.
17