Table des Matières
Publicité
2.4. Features
a
c
2.5. Display
Different modes and output power would be displayed on the screen as below:
4
ON/OFF :
a
this button again to turn on the curing light. Pressing
this button during the curing cycle will interrupt and
end the cycle. If the unit is in sleep mode, press this
button will wake the unit and it will display with the last
b
mode choosen.
Screen : Display second.
b
c
MODE : Push the MODE button, the time would be
changed as followed 10 secs → 20 secs → 30 secs → 40
Stand mode output 10 seconds.
Ramp mode output 20 seconds.
Ramp mode output 30 seconds.
Stand mode output 40 seconds.
Press this button start the handpiece. Press
Publicité
Table des Matières
