Intended Use; Environment; Getting Started - Vyaire Micro 1 Mode D'emploi

Intended Use

The Micro I Spirometer is intended to measure the maximal volume
and flow of air that can be moved out of a patient's lungs. The
system is intended for use with Paediatric and adult patients over
the age of 3 years in hospitals, physician offices, laboratories and
occupational health testing environments.

Environment

Please observe the following precautions:
• Avoid exposing the Micro I to direct sunlight.
• Avoid operating the spirometer in dusty conditions or near to
heating appliances or radiators.
• Do not keep the spirometer in a damp place or expose it to
extreme temperatures.
• Do not direct the transducer holder towards a strong light
source whilst operating the spirometer.

Getting Started

It is recommended that Micro I spirometer is fully charged before
use. The power supply is provided with separate UK, USA and
European plugs. Connect the required plug to the power supply and
plug in to a mains outlet. Connect the Micro I to the power supply
using the USB/charging cable and the charging symbol will appear
on the screen.
Fully charge for a minimum of 5 hours when used for the
first time.
Remove the protective film from the display screen before use.
14