Operation - Abatement Technologies HEPA-AIRE V8000WD MK-2 Notice D'utilisation

V8000WD
MK-2

4 Operation

4.1 Connections
4.1.1 Connecting the
suction hose
4.1.2 Electrical
connection
4.2 Switching the
vacuum on
The operating voltage shown on
the rating plate must corre-
- s pond to the voltage of the
mains power supply .
The unit is equipped with a
single two-position, clearly marked,
OFF / ON switch.
5. Fit the suction tube fasteners
as shown in the illustration.
1 . Connect the suction hose.
1. Ensure that the cleaner is
s witched off.
2. Insert the po wer cord into a
properly installed and fused
and grounded contact.
4
4