IMG STAGELINE LTR-106 Mode D'emploi page 9

lines (more than 2 m). Thus, the line at the output (5, 6 or 7)
will be less sensitive to interferences.
6) Should a phase reversal occur during the complete signal
transmission, this can be compensated by pressing the
PHASE switch (3). It is possible to find the optimum setting by
listening to the bass.
5 Specifications
Frequency range: . . . . . . . . . . . . . . . . . . 20–25 000 Hz
Ratio: . . . . . . . . . . . . . . . . . . . . . . . . . . . 1:1/2:1
Input impedance: . . . . . . . . . . . . . . . . . . 600 Ω
Output impedance: . . . . . . . . . . . . . . . . . 600 Ω/150 Ω
Optimum source impedance: . . . . . . . . . 50 – 600 Ω
Optimum load impedance: . . . . . . . . . . . ≥ 2 kΩ
Max. input voltage at 1 % THD/40 Hz: . . 5 V
Dimensions (W × H × D): . . . . . . . . . . . . 482 × 44.5 × 90 mm,
Weight: . . . . . . . . . . . . . . . . . . . . . . . . . . 1.4 kg
Subject to technical change.
All rights reserved by MONACOR
Co. KG. No part of this instruction manual may be reproduced in
any form or by any means for any commercial use.
1 HE (rack space)
® INTERNATIONAL GmbH &
GB
9