Cleaning, Care & Maintenance; Crumb Tray - Rowlett Premier Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 14
3. The slot selector knob is used to determine which slots are energised.
Note: All Rowlett toasters (excluding 2-slot toasters) have a slot selector knob
that enables you to control which slots are in use, saving on element wear and
electricity.
Choose how many slots you need and adjust the selector knob accordingly.
Slots are energised from the left.
4. Load bread into toaster with ejector lever up. Lower to toast. Do not use bread that is too thick.
5. Set the timer knob to desired time setting according to your taste. It is better to use 1 day old bread.
6. The power indicator light will illuminate and the timer will start.
7. Power will be automatically turned off shortly before the timer completes its task.
8. The toast can be removed immediately by using the ejector lever, or left in the machine to keep warm
for several minutes.
Cleaning, Care & Maintenance
Always switch off the appliance, disconnect the power supply and allow to cool
before cleaning or performing maintenance.
If necessary wipe the exterior with a soft cloth and warm soapy water.
Never use a scouring agent as this will scratch the finish.
Dry thoroughly after cleaning.

Crumb Tray

Periodically empty the crumb tray (located at the bottom of the appliance).
Slide the tray out to empty.
Slot back in securely when replacing the tray.
Notes on maintenance
Bread containing fruit or nuts can be toasted but natural sugars present may cause them to stick to
the guard rails on your toaster. Such debris should not be left on the guard rails as it will char and
possibly smoke and can swell so as to damage the element.
Elements wear out with use and it is impossible to predict their life as this is affected by the amount
and type of use and the quality of electrical supply. They can easily be damaged by careless handling.
Your toaster has been designed that should anything go wrong all major components such as
elements and switches can easily be replaced.
Repairs or replacement of components should be undertaken only by a competent electrician.
All components and fitting instructions can be obtained from your supplier.
Rowlett Toaster IM_ML_A5_v2_20201021.indb 5
Rowlett Toaster IM_ML_A5_v2_20201021.indb 5
UK
5
2020/10/21 16:57
2020/10/21 16:57

Publicité

Table des Matières
loading

Table des Matières