Additional Safety Warnings - Haussmann PT102706 Guide De L'utilisateur

SAFETY INSTRUCTIONS
• Do not use on a ladder or unstable support. Stable footing on a solid surface
enables better control of the tool in unexpected situations.
TOOL USE AND CARE
• Use clamps or other practical way to secure and support the work piece to a
stable platform. Holding the work by hand or against your body is unstable and
may lead to loss of control.
• Do not force tool. Use the correct tool for your application. The correct tool will
do the job better and safer at the rate for which it is designed.
• Do not use tool if switch does not turn it on or off. Any tool that cannot be
controlled with the switch is dangerous and must be repaired.
• Disconnect the plug from power source before making any adjustments,
changing accessories, or storing the tool. Such preventive safety measures
reduce the risk of starting the tool accidentally.
• Store idle tools out of the reach of children and other untrained persons. Tools
are dangerous in the hands of untrained users.
• Maintain tools with care. Keep cutting tools sharp and clean. Properly
maintained tools with sharp cutting edges are less likely to bind and are easier
to control.
• Check for misalignment or binding of moving parts, breakage of parts, and any
other condition that may affect the tool's operation. If damaged, have the tool
serviced before using. Many accidents are caused by poorly maintained tools.
• Use only accessories that are recommended by the manufacturer for your
model. Accessories that may be suitable for one tool, may become hazardous
when used on another tool.
• Keep the tool and its handle dry, clean and free from oil and grease. Always use
a clean cloth when cleaning. Never use brake fluids, gasoline, petroleum-based
products, or any strong solvents to clean your tool. Following this rule will
reduce the risk of loss of control and deterioration of the enclosure plastic.
SERVICE
• Tool service must be performed only by qualified repair personnel. Service or
maintenance performed by unqualified personnel may result in a risk of injury.
• When servicing a tool, use only identical replacement parts. Follow instructions
in the Maintenance section of this manual. Use of unauthorized parts or failure
to follow Maintenance Instructions may create a risk of shock or injury.
ADDITIONAL SAFETY WARNINGS
• The nozzle of the heat gun becomes very hot during operation and should not
be touched until the tool has cooled. Always hold the tool by the insulated
gripping surface to reduce the risk of serious personal injury.
• Heat guns produce very high temperatures and must be used with caution to
prevent flammable or combustible materials from igniting. Keep tool in constant
motion; do not stop or dwell in one spot. Following this rule will reduce the risk of
fire or serious personal injury.
• Excessive heat can generate fumes, which may be dangerous when inhaled.
Wear a dust respirator mask or dual filter respirator mask when using the heat
gun. Following this rule will reduce the risk of serious personal injury.
16