emerio FC-123454 Mode D'emploi page 6

FC-123454
PARTS AND ACCESSORIES
1. On/off switch
2. Handle
3. Power indicators (three bars)
4. Charging port
5. Clean water tank
6. Dirty water tank
7. Rollers
8. Base
9. Adaptor
INSTALLATION
1. Upright the main body; attach the handle part to the
main body, press the tube lock (A) at the same time.
The tube lock (A) will pop out through the small hole
(B) in the tube. Make sure the handle part is firmly
assembled to the main body.
2. Rest the appliance steadily on the base.
HOW TO CHARGE
When cleaning is finished, turn off the appliance; use the adaptor to charge the appliance. The appliance can
not be used during charging.
1) Plug one end of the adaptor into the charging port of the main unit.
2) Plug the other end of the adaptor into the power outlet.
3) During charging, the power indicator will flash.
4) When fully charged, the power indicators (three bars) will stay lit.
Note:
Electric quantity for three bars: 65% ~ 100%;
Electric quantity for two bars: 30% ~ 60%;
Electric quantity for one bar: less than 30%.
If three bars are flashing: nearly no power and need to charge immedicately.
- 5 -
EN