Automatic Operation - Sinmag Europe KM-25 Mode D'emploi

4.2

Automatic operation

Press the + and - -buttons below timer I to set desired
A.
time for reverse direction.
Press the + and - - buttons below timer II to set the
B.
desired time for first speed.
Press the + and - buttons below timer ||| to set the
C.
desired time for second speed.
Press the AUTO / MANU -button until the "AUTO"-LED
D.
lights up.
Press the
E.
Press the ON -button to start the machine.
F.
After completing the above procedure, the machine will start ope-
rating. It will work in reverse direction until timer I reaches 0. Then ,
the machine will start operating in first speed until timer II reaches 0.
Finally the machine will start operating in second speed until timer |||
reaches 0. The machine will now stop automatically.
During the "AUTOMATIC" operation, the machine will stop when you
lift the safety cover.
The timer will stop at its current position. The timer will restart from that
position after you have closed the safety cover and pressed the ON
-button.
Upon pressing the OFF -button, the timer will return to the set positi-
on and restart.
-button until the
F
R
SINMAG EUROPE BVBA
-LED lights up.
ENG
ENG
9